Metrohm Liquid Handling Station - Manual (Page 21)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Installation
￭￭￭￭￭￭￭￭ 13
Aligning the Liquid Handling Station with the retaining
plate
1 Loosen the screw (11-2) on the clamping fastener.
2 Slide the entire Liquid Handling Station that is on the assembly rail
under the retaining plate in the direction of the arrow (see Figure 14,
page 14) (14-1).
Figure 13 Positioning the Liquid Handling Station
The precise position is shown in the following figure.