Banner PresencePLUS Lighting - Manual

Datasheet
Visible red or infrared backlights in 2 sizes, with 3-conductor cable
• Diffused backlight for PresencePLUS ® Pro sensors. See Banner’s website
at www.bannerengineering.com for a complete lighting tutorial.
• Continuous light and strobed operation, selectable via sensor software
• Solid-state LED matrix, in two sizes.
• Direct connection to PresencePLUS Pro or to an external power supply
using 3 discrete wires.
• Two sizes available; see models table.
• Bracket option(s) available for all models.
Models
Model LED Color Wave Length Active Area
LEDIB70X70W Infrared 940 nm 71 x 71 mm
(2.8" x 2.8")
LEDRB70X70W Visible Red 660 nm
LEDIB85X220W Infrared 940 nm 85 x 220 mm
(3.35" x 8.67")
LEDRB85X220W Visible Red 660 nm
To order the 9 m (30 ft) integral cable model, add the suffix “W/30” to the model number (for example, LEDIB70X70W
W/30).
Specifications
Light Source
LED; see models table for wavelengths
Illumination
Diffused for use in applications needing a backlit light source.
Supply Voltage and Current
70 X 70 mm models: 24 V dc at 250 mA max.
85 x 220 mm models: 24 V dc at 500 mA max.
Connections
2 m (6.5 ft) or 9 m (30 ft) PUR-jacketed, 3-conductor attached cable
Construction
Low-carbon steel with black zinc plating, acrylic window
Useful Life
10,000 hours (LED ON time). When operated within specifications,
output will decrease less than 30% after 10,000 hours and less than
40% after 20,000 hours.
Operating Conditions
0 °C to 50 °C (32 °F to 122 °F)
90% at 50 °C (non-condensing) max. relative humidity
Cleaning Instructions
• Regularly remove any dust, dirt, or fingerprints from the light
source.
• Blow off dust using anti-static compressed air.
• If necessary, use a lens cloth and lens cleaner or window
cleaner to wipe off remaining debris. Do not use any other
chemicals for cleaning.
LED..B..W Series Backlights
Original Document
115349 Rev. C
27 February 2014
115349