Banner PresencePLUS Lighting - Manual

LED Ring Lights for Use with PresencePLUS® Pro Sealed Sensors
Shown with cable installed; see Cables list for op-
tions
• Rugged, waterproof housing, rated IEC IP68
• 90 mm light diameter
• Solid-state LED matrix; continuous or strobed operation is selectable via sen-
sor software.
• Available with 316 stainless steel or nickel-plated aluminum housing and a
choice of either acrylic or tempered optical glass windows
• Mounts directly to PresencePLUS Pro washdown sensors
• LEDs directly illuminate target
Models
LED Color Housing
Optional Ambient Light
Filter Kit Optional Polarizing
Filter Kit
Acrylic Window Glass Window
LEDIR90S-P LEDIR90S-G Infrared, 940 nm
Nickel-plated alu-
minum
FLTI, included with IR
lights
LEDRPFK90
LEDRR90S-P LEDRR90S-G Visible Red, 630 nm
FLTR, included with
LEDRPFK90
LEDWR90S-P LEDWR90S-G White, All Visible FLTB or FLTG
LEDBR90S-P LEDBR90S-G Blue, 464 to 475 nm FLTB
LEDGR90S-P LEDGR90S-G Green, 520 to 540 nm FLTG
LEDIR90SS-P LEDIR90SS-G Infrared, 940 nm
316 Stainless steel
FLTI, included with IR
lights
LEDRR90SS-P LEDRR90SS-G Visible Red, 630 nm
FLTR, included with
LEDRPFK90
LEDWR90SS-P LEDWR90SS-G White, All Visible FLTB or FLTG
LEDBR90SS-P LEDBR90SS-G Blue, 464 to 475 nm FLTB
LEDGR90SS-P LEDGR90SS-G Green, 520 to 540 nm FLTG
Specifications
Supply Voltage and Current
Infrared: 24V dc @ 180 mA max.
All other colors: 24V dc @ 250 mA max.
Connections
8 mm male Pico-style connector; accessory cable re-
quired for operation, see page 3 for options
Construction
Housing: Nickel-plated aluminum or 100% 316 stain-
less steel, depending on model
Window: Acrylic or tempered optical glass window, de-
pending on model
Environmental Rating
Nickel-plated models: IEC IP68
Light Source
LED, see Models table above for wavelengths
Illumination
High-intensity ring light
Useful Life
When operated within specifications, output will de-
crease less than 30% after 20,000 hours and less than
50% (less than 40% for red and IR models) after
30,000 hours.
Cleaning Instructions
Regularly remove any dust, dirt, or fingerprints from the
light source.
1. Blow off dust using anti-static compressed air.
LEDxR90S Series Sealed Ring Lights
P/N 128842 rev. D 8/2/2012
0 128842 7