Battery cap information, Safety warnings and instructions: charging – Black & Decker NPT318 User Manual

Page 4

Advertising
background image

4

3.

CAUTION: To reduce the risk of injury, charge only

Black & Decker batteries. Other types of batteries may burst
causing personal injury and damage.

4. Do not expose charger to rain or snow.
5. Use of an attachment not recommended or sold by Black &

Decker may result in a risk of fire, electric shock, or injury to
persons.

6. To reduce risk of damage to electric plug and cord, pull by plug

rather than cord when disconnecting charger.

7. Make sure cord is located so that it will not be stepped on,

tripped over, or otherwise subjected to damage or stress.

8. An extension cord should not be used unless absolutely

necessary. Use of improper extension cord could result in a risk
of fire, electric shock or electrocution.

a. Two-wire cords can be used with 2-wire or 3-wire extension

cords. Only round jacketed extension cords should be used, and
we recommend that they be listed by Underwriters Laboratories
(U.L.). If the extension is to be used outside, the cord must be
suitable for outdoor use. Any cord marked for outdoor use can
also be used for indoor work. The letters "W" or "WA" on the cord
jacket indicate that the cord is suitable for outdoor use.

b. An extension cord must have adequate wire size (AWG or

American Wire Gauge) for safety, and to prevent loss of power
and overheating. The smaller the gauge number of the wire, the
greater the capacity of the cable; that is, 16 gauge has more
capacity than 18 gauge. When using more than one extension to
make up the total length, be sure each extension contains at
least the minimum wire size.

CHART FOR MINIMUM WIRE SIZE (AWG) OF EXTENSION CORDS
NAMEPLATE RATING AMPS – 0 – 10.0
Total Extension Cord Length (ft) 25

50

75

100

125

Wire Gauge

18

18

16

16

14

9. Use only the supplied charger when charging your tool. The use

of any other charger could damage the tool or create a
hazardous condition.

Battery Cap Information

Battery storage and carrying caps are provided for use whenever
the battery is out of the tool or charger. Remove cap before placing
battery in charger or tool.

WARNING: Do not store or carry battery so that metal objects

can contact exposed battery terminals. For example, do not place
battery in aprons, pockets, tool boxes, product kit boxes, drawers,
etc. with loose nails, screws, keys, etc. without battery cap.
Transporting batteries can possibly cause fires if the battery
terminals inadvertently come in contact with conductive materials
such as keys, coins, hand tools and the like. The US Department of
Transportation Hazardous Material Regulations (HMR) actually
prohibit transporting batteries in commerce or on airplanes (i.e.
packed in suitcases and carryon luggage) UNLESS they are
properly protected from short circuits. So when transporting
individual batteries, make sure that the battery terminals are
protected and well insulated from materials that could contact them
and cause a short circuit.

Safety Warnings and Instructions:

Charging

1. This manual contains important safety and operating

instructions.

2. Before using battery charger, read all instructions and cautionary

markings on (1) battery charger, (2) battery, and (3) product
using battery.

Battery Cap

629050-00 NPT318 Pole Trimmer 12/14/04 2:12 PM Page 4

Advertising