Cutting out graphic objects, Cutting out hotshape objects – Brady label maker User Manual

Page 200

Advertising
background image

10-8

¡

Creating Cut Out Objects

Sequence to create Sequential labels, with variable text objects

consisting of increasing or decreasing numbers or alphabetic
letters. Refer to Creating sequential labels on page 7-13.

Text list to create Text list labels, with variable text objects

consisting of a list of items you create. Refer to Creating text list
labels
on page 7-16.

3. When the creation sequence is complete and you are back in the

Editor window, choose Print to process the labels and cut out the
variable text objects.

Cutting out graphic objects

Not all graphic objects may be specified as cut out objects. The system
offers only graphics suitable for cutting out when you choose the
Graphics button on the Insert Object screen, and does not allow you
to specify a graphic object as a cut out object if it is not suitable for
cutting out.

To cut out graphic objects

1. After selecting the Cut out object option on the Insert Objects

screen, choose Graphic.

2. You’ll see the Graphics Categories screen (shown in Figure 7-12 on

page 7-22). Select a category and choose OK.

3. You’ll see the Graphics screen (shown in Figure 7-13 on page 7-22.)

Select a graphic and choose OK.

4. When the creation sequence is complete, choose <Print>, which

processes the labels and cuts out the graphic objects.

Cutting out HotShape objects

HotShapes are especially suited for cutting out. You can cut out stars,
circles, arrows, and other shapes. See Adding HotShapes on page 7-23
for information about the HotShapes available on your system.

To cut out HotShapes

1. After selecting the Cut out object option on the Insert Objects

screen (Figure 10-1 on page 10-4), choose HotShapes.

2. You’ll see the HotShapes screen. Select the HotShape object you

want to add as a cut out.

Advertising