Brady label maker - Manual (Page 81)

Setting Preferences ¡ 5 - 9
The Check Supply Colors screen displays:
Figure 5-4. The Check Supply Colors screen.
3. Enter a name for the color, up to 32 characters in length. Be sure the
name is not already in use in your system.
4. If you change your mind or make a mistake, press Cancel. To save
the name you typed, choose OK
5. If the system detects additional missing color names, it prompts you
again with the Check Supply Color screen, and repeats the process
until you have supplied names for all new colors.
When all colors are named, the system displays a message.
Sample of
color to be
named is
shown in the
Multicolor and
Color & Cut
systems only.