BT 250 - Manual (Page 7)

If you experience any problems, please call the Helpline on Freephone 0808 100 6554* or visit www.bt.com/producthelp
7
Parent unit
Your BT Digital Baby Monitor 250
Baby sound level LEDs
Indicates the level of received
sound. The LEDs will light up
progressively as the sound
increases. See page 18 for
further information.
Mute LED
Steady red indicates that Mute
All has been switched on.
Amber indicates that Mute Low
has been switched on.
Talk (on side of unit)
Press to talk to your baby.
LCD Display
Power saving backlight turns
on when you press any button
and then switches off after
15 seconds.
Menu
Press to open the menu. Press
and hold to exit the menu and
return to the idle screen.
Torch (on back of unit)
Press to switch the torch feature
on and off.
Link indicator
Steady green indicates that the
Baby and Parent units are linked.
Flashes green if no link established
for 30 seconds. Flashes red if no
link established after 30 seconds.
Also flashes green when the Talk
button is pressed on the Parent
unit to initiate parental talk back.
Battery status indicator
Red light indicates the batteries
are low and need re-charging.
Microphone
OK
Press to confirm the menu
option displayed.
Up
Increase speaker volume.
Scroll through the menu options.
Mute Low
(on top of unit)
Press to toggle the
Baby unit microphone
sensitivity between
normal and Mute Low.
Mute All
(on top of unit)
Press to toggle the
Parent unit receive
volume between
on and off.
Power on/off
(on top of unit)
Press and hold to
switch the power
on or off.
Down
Decrease speaker
volume. Scroll through
the menu options.