Bowflex XtremeSE - Manual (Page 11)

Bowflex.Xtreme ® .SE.Assembly.Manual 
Assembly Guide
Step 1 Base.Frame.Assembly
parts:
•...Base.Frame. •...Right.Frame.Rail
•...Left.Frame.Rail. •...Rear.Cross.Member
Hardware:
..•...6.Button.Head.Screws.(.3/8".X.3/4")
.•....6.Flat.Washers.(3/8")
tool: ...7/32".Allen.Wrench..
(or.Hex.Wrench)
1-1 ...Lay.all.parts.on.floor.as.
shown .
1-2 ...Insert.Frame.Rail..
connectors.into.the..
Base.Frame.and..
Rear.Cross.Member ...
Secure.with.screws..
and.washers.as.shown .
Finger tighten screws
at this time.
Step 2 ..Lower.Lat.Tower.Assembly
parts:
.•...Lower.Lat.Tower.Frame
•...Rod.Box.with.Power.Rod
® .Pack
Hardware:
.•...3.Self.Threading.Screws.(#10.X.1")
.•...3.Flat.Washers.(1/4")
tool: Phillips.Screw.Driver
2-1 ...Lay.parts.on.floor.as.shown ..
Firmly.slide.Rod.Box.into.Lower.
Lat.Tower.Frame .
2-2 ...Fasten.the.Rod.Box.to.the..
Lower.Lat.Tower.Frame.with..
screws.and.washers.as.shown ...
Tighten.screws.until.snug .
Self.Threading.
Screws
Flat.Washers
Rod.Box.w/.Rods
Lower.Lat.Tower.Frame
Rear.Cross.
Member
Right.Frame.Rail
Button.Head.
Screws
Flat.
Washers
Flat.Washers
base frame
Button.Head.Screws
Left.Frame.Rail
Button.Head.Screws
Flat.Washers