BT Digital Cordless Telephone - Manual (Page 33)

33
Elements – New Style – Edition 4 – 31.08.06 – 7644
If you experience any problems, please call the Helpline on 0870 605 8047 or email [email protected]
Restore default settings
You can restore your BT Elements phone to its default
(original) settings as described on page 34.
1. Press to open the main menu.
2. Press or until
Setup
is displayed, then press .
3. Press or to select
Default
and press .
4. Enter the 4 digit PIN code and press .
5.
Confirm?
is displayed, press to confirm the reset. The
handset will switch off, then switch back on again with the
default settings restored.
Restore default settings without a PIN
If you have forgotten your PIN code, you can restore your BT
Elements to the default settings following the procedure
shown below.
1. Unscrew and remove the belt clip and battery compartment
cover.
2. Remove the batteries for a few minutes. Press and hold ,
while still pressing the button, insert the batteries again
observing the polarity markings (+ and -).
3.
Default
is displayed, press .
When the phone powers up, the default settings will
be restored.
Menu
Menu
Menu
Menu
Menu
Menu
Default PIN code setting is 0000.
Set-up menu
Please note, restoring the default
settings will delete your phonebook,
redial and calls list.