E-flite Brio 10 ARF - Manual (Page 30)

Park 480 Outrunner Motor Installation
Required Parts
• Fuselage
• Firewall stick mount (included)
• 4-40 x 1/2" (12mm) socket head screw (4)
• Outrunner stick mount (included)
• Aluminum spacers, 4mm long (4)
• 3mm x 8mm Phillips head screws (4)
(to mount motor to Outrunner stick mount)
• 2mm x 8mm sheet metal screw (3) (to secure mounts)
• Park 480-size Brushless Outrunner Motor
Required Tools and Adhesives
• Hex wrench: 3/32"
• Phillips screwdriver (small)
Skip to page 36 for setup of a 6-pole motor
installation using a gearbox.
Note: This section covers the installation of our
Park 480 Outrunner or equivalent size motor.
 1. Secure the firewall stick mount to the fuselage
using four 4-40 x 1/2" socket head screws.
30