Setting up your wave, Radio, Setting the clock – Bose Wave Radio II User Manual
Setting Up Your Wave
Unwind and straighten the power cord to ensure the best FM reception. Your
,, uses the power cord as an FM antenna.
Setting the clock
After plugging in your Wave
,,, set the clock using the remote. Your Wave
easily operated using the remote control. Just aim the remote at the front panel and press the
Press and hold Time – or Time + for one second until
– CLOCK SET – appears on the display.
Press Time – to adjust the displayed time backward or
press Time + to adjust the displayed time forward until
it matches the current time. You can also press and hold for rapid adjustment.
Wait five seconds for the system to exit the clock setup mode automatically.
To change the clock display from 12-hour (AM/PM) time to 24-hour (Military) time, see
“Changing the clock time format” on page 18.
Note: In the event that the Wave
,, loses power, the clock time and other system settings
are stored in backup memory for up to 48 hours. This feature retains the systems settings when
you unplug and move the unit or when a power outage occurs.
Note: Press-and-hold operations require holding the button down for at least one second.