E-flite C-Ray 180 PNP - Manual (Page 7)

7
EN
Arming the ESC
Arming the ESC also occurs after binding, but
subsequent connection of a fl ight battery requires
the following steps.
If you accidentally connect the battery while the
throttle is fully opened, a musical tone will sound
and the ESC will not arm until the throttle is
returned to the off position.
CAUTION: Always keep hands away from the
propeller. When armed, the motor will turn the
propeller in response to any throttle movement.
Lower throttle and throttle trim to lowest
settings.
Power ON the transmitter.
1
Remove the canopy and install the fl ight
battery on the hook and loop strip, then
connect the battery to the ESC, noting
proper polarity.
2
Series of tones
Continuous LED
3
Control Horn and Servo Arm
Settings
This illustration shows the factory settings for
linkages on the control horns and servo arms.