GBC 61 Plackmatic Bookmaker - Manual (Page 24)

24
OPERATOR MANUAL BM 61 T10165
6. Problem solving
6.1 Problem solving
PROBLEM POSSIBLE CAUSES ACTION
Paper jam in fold roller
section
Folding not selected
Side joggers set too tight
Select folding on control panel
Adjust side joggers correctly
Stapler jam Stapler not aligned with anvils Align staplers with anvil
Bad sheet alignment
side
Side joggers incorrectly adjusted Adjust side joggers to the paper
size
Bad sheet alignment
front to back
Rear jogger incorrectly adjusted
Upper pressure roller missing
Upper pressure roller incorrectly
positioned
Adjust rear jogger
Mount upper pressure roller
Position the upper pressure roller to
correct paper size
Not possible to select
third party eject on
Collator
Connection cable not attached
Top cover open
Power switch set to OFF position
Booklet Maker in jam condition
Attach connection cable
Close top cover
Set power switch to ON position
Clear jam in Booklet Maker
Paper jam into side
guides
Booklet Maker incorrectly
positioned to Collator
Paper size setting incorrect
Reposition the Booklet Maker for
the correct paper size
Adjust side joggers to the correct
paper size
Paper jam in infeed
area
Upper guides on side jogger
unfolded
Upper pressure roller incorrectly
positioned
Rear jogger unit lowered in ON-
line mode
Fold down upper guides
Reposition the pressure roller
Raise the rear jogger
Set remaining in
stapling section
Lower stapler
Misfeed in Collator
Paper jam in Booklet Maker
Side jogger set too tight
Load stapler
Correct problem in Collator and
restart
Clear paper jam
Adjust the side joggers to the cor-
rect paper size