GBC EzClick Binder - Manual (Page 4)

Location of controls
1 Document support lid
2 Document thickness guide
3 Click Spine size guide
4 Click Switch
5 Click Spine Storage area
6 Binding Channel
7 Click Spine closing dials
8 Click Spine closing guide
9 Editing tool

Special notice
Thank you for choosing a GBC Binding Machine. We aim to produce
quality binding machines, with many advanced features to enable you
to create excellent results every time. Before using your machine for the
first time, please take a few minutes to read through this guide.
Specifications
Document Binding
Max Bind Capacity
Machine Weight
Machine Dimensions (HxWxD)
GBC EzClick ™ Binder
A4
100 sheets (90gsm)
plus front & back Cover
3.21kg
104x395x209mm
Important safety instructions
YOUR SAFETY AS WELL AS THE SAFETY OF OTHERS IS IMPORTANT
TO ACCO BRANDS EUROPE. IN THIS INSTRUCTION MANUAL AND ON
THE PRODUCT ARE IMPORTANT SAFETY MESSAGES. READ THESE
MESSAGES CAREFULLY.
m
General safeguards
• Use the unit for its intended purpose only.
• Follow all warnings and instructions marked on the unit.
• Do not place anything in the machine other than the maximum binding
capacity. (GBC pre-punched paper up to 100 sheets (90gsm) plus 2 x
GBC pre-punched covers).
Setting up
• Retain the packaging in case you need to return the machine for
repair.
• Place the unit on a secure, stable work area to prevent the unit from
falling and possibly causing personal injury and damage to the unit.
IMPORTANT: The machine is a binding unit only. It will not punch
paper or covers. You must use pre-punched papers and covers to bind
with this machine.
Loading pre-punched paper
into your printer
IMPORTANT: If you are using pre-punched paper for the first time
it is advisable to try some test prints first to establish the
correct orientation for your printer. You may need to refer to the
manufacturers instructions so that the paper is in the correct draw/tray
on your printer. Failure to do this could result in a paper jam.
Multi Drawer Printers
If your printer has multiple paper drawers you may wish to dedicate one
drawer to pre-punched paper. An adhesive label is provided to enable
you to label the outside of the drawer.
Single Drawer Printers
Replace the standard paper in the drawer with pre punched paper.
Manual Feed Tray
If your printer has a manual feed tray you may wish to use this for pre-
punched paper when you are ready to produce a bound document.
Printing the document (A)
1 Load the pre-punched paper into the printer.
2 Print a test page to ensure you have the correct orientation for your
printer – If using a multi drawer/manual feed printer you will need
to select the correct drawer/ tray. (Usually in the properties section
within your print menu).
3 Once you are happy that the test page has printed correctly place
the adhesive label onto your printer tray/drawer.
Collating your document
1 Now that your document has been printed onto the pre punched
paper you are ready to add a pre-punched front and back cover. (see
fig 1)
Binding tip:
• Place the front cover onto the top of your document. The back
cover should then be placed on top of the front cover with the
inside of the back cover facing upwards.
• Once your document has been bound you then flip the back cover
over so that it is at the back of the document.
This step ensures that after closing of the Click spine, it will be
hidden between the back cover and the last page.