GBC C95e Comb Binder - Manual (Page 4)


Special notice
Thank you for choosing a GBC Binding Machine. We aim to produce
quality binding machines at an affordable price, with many advanced
features to enable you to create excellent results every time. Before
using your machine for the first time, please take a few minutes to read
through this guide.
General safeguards
• Please read the instructions and keep them safe for future reference.
• When using the machine, always ensure the machine is on a flat and
stable surface.
• Keep out of reach the reach of children at all times.
• Do not tamper in any way with the internal mechanisms of this
machine.
• Do not immerse in liquid.
• Always test the machine with scrap paper before punching the final
document.
• When punching PVC / PP covers, we recommend the cover be
punched with some paper either side.
• Do not punch metallic objects such as staples or paper clips.
• Empty the waste tray regularly.
• Check that the rating supply of the machine matches your electicity
supply prior to connection.
• The socket outlet shall be installed near the equipment and shall be
easily accessibe.
• This machine has a recommended duty cycle of 5 operations per
minute, up to a maximum of 10 minutes on / 20 minutes off.
• This machine is fitted with a thermal overload safety feature. In
extreme circumstances, the motor may overheat which will activate
the safety feature. This feature will prevent the machine punching until
it has cooled sufficiently.
• The thermal overload switch will automatically reset after
approximately 10 minutes. The machine will then operate as if it
had been overloaded. Please refer to ‘Punching the Document’ for
operation details.
Unpacking and setting up
• Your machine is ready to use when removed from the box. Retain the
packaging in case you need to return the machine for repair.
• Position the machine on a flat stable surface.
• Connect the plug end of the power cable to the electricity outlet
socket.
• Switch On the electricity supply.
• Switch On the machine using the On/Off switch, located at the rear
right of the machine.
• The green neon light indicates that the power is On and the machine
is ready for use.
Safety instructions
YOUR SAFETY AS WELL AS THE SAFETY OF OTHERS IS IMPORTANT
TO ACCO BRANDS EUROPE. IN THIS INSTRUCTION MANUAL AND ON
THE PRODUCT ARE IMPORTANT SAFETY MESSAGES. READ THESE
MESSAGES CAREFULLY.
m
Service
• Within a warranty period of 2 years from the date of purchase,
ACCO Brands Europe will at its own discretion, repair or replace
defective original parts. The warranty specifically excludes faults or
breakdown occurring as a result of accidental or intentional misuse
or failure to operate or maintain the machine in accordance with the
manufacturer’s instructions.
Warranty Period
2 years (parts & labour) Model
GBC C95e Comb Binder
Maintenance options
• If you would like to extend your warranty coverage beyond the stated
manufacturers period, please consult your local ACCO Brands Europe
reseller for options.
Location of controls
1 On/Off Switch
2 Comb Element Size Guide
3 Adjustable Edge Guide
4 Punching Channel
5 Waste Tray (on underside of machine)
6 Comb Opening Knob
7 Waste Tray Full Neon (red)
8 Auto Reverse Neon (red)
9 Power ON Neon (green)
J ‘Punch’ Button
Specifications
GBC C95e Comb Binder
Electric 0.9A
DIN A4 (max. 310mm)
US Pitch 9/16” / 14.28mm
21 fixed
fixed 2.5mm
max. 15 sheets
max. 2 foils
5mm
19mm
165 sheets
8.6kg
440 x 330 x 160mm
230v 50Hz
Operation Mode
Max. binding size
Hole pitch
Number of punch slots
Margin depth
Punching - paper (80gsm)
Max. punching - plastic foils (0.2mm)
Min. comb diameter
Max. comb diameter
Max. document size
Net weight
Dimensions
Voltage