Glyph DVD Duper1 - Manual (Page 8)

4
AEC-7763LC/LD & ARS-2022/2022D
3.2 About HDD Installation
With a 3.5” hard drive you can use and enjoy the function of Image. In other words,
you have one more choice to duplicate a CD or DVD from an image file stored in the
hard drive.
3.2.1 With a HDD
If you install a 3.5” hard drive to ARS-2022DS, the operation procedures will be as
follows.
l
Once ARS-2022D detects the hard drive, it will ask if you want to format
or not. In CD a partition has 1GB while in DVD 5GB.
l
Use function 8 Select Source to set the hard drive as the source.
l
In function 9 Image select a partition to store the data.
l
If there is no data in a selected partition, place a source DVD into DVD-
ROM and use function 9-01 Load to transmit data from DVD into the selected
partition by pressing ENT. Different data can be stored in different partitions.
l
Switch to function 1 Copy by pressing
▲
. Place a blank DVD disk into
the DVD writer, and press ENT to start copying.
l
When copying comes to an end, the passed DVD will eject automatically.
The default is automatic ejecting, but you can change it.
l
The failed DVD will remain in the writer. The default is keeping a failed
DVD in the writer, but you can change it. To take the failed DVD you need
to press the button on the writer.
l
During operation do not press any button on ARS-2022D, because
interruption will harm the device, and DVD will be damaged.
There are 12 functions for you to use. Function 1 is Copy. You can press
▼
to see
other functions.