Glyph Firewire CDR - Manual (Page 7)

7
The two ports are functionally the same and it does not matter
which one you plug into. A terminator is not necessary – this is
FireWire.
Step 4 - Power Up the Glyph WildFire
Check that you have:
• A good location for the drive
• The drive off and the power cord plugged into the drive
• The firewire cable connected to the WildFire CDR.
Power up your WildFire CDR. WildFire CDR drives have power switches
on the right side of the front panel.
Make sure that the power light is on.
Step 5 - Power Up Your
Computer
Now that the drive is on, power up your computer.
Step 6 - Using & Inserting the CDR Discs
Now that you have completed unpacking, connecting your drive
correctly, and powering up both your CDR and computer you are
ready to learn how to use the CD tray and CDR disc. Additional
discs are available from your dealer or from Glyph. See page 10 to
prepare your Mac.