Glyph GT 062E - Manual (Page 9)

9
6. The next window requires that you verify the
change request. Click OK to change the drive
configuration. NOTE: ALL DATA ON THE DRIVES
WILL BE DESTROYED.
8. At this point you may see the Mac OS Disk Inser-
tion window. Now that the drive configuration has
changed, Mac OS has re-discovered the GT 062E and
prompts you to format the newly configured device.
If you see the window below, click Eject. If you do
not see this message, simply go to step 9.
7. The next window reports that the drive con-
figuration has changed. After a few seconds the
system will update, and Glyph Manager will dis-
play the new drive configuration. Click OK in this
window.
7. The next window prompts you to finalize the new
configuration. Click YES to accept the configuration
change.
3. Un-mount the volume(s) associated with the unit you are configuring by dragging them to the trash in the
Finder. This is very important to ensure successful drive mode change because it forces Mac OS to “forget”
the current configuration.
4. Click the Change Configuration button.
5. Select the desired configuration on the following
screen and click the Change button. Note that the
top selection (single drive) is not selectable at this
time.