Installation of optional security cable, Technical support – GunVault GVB 3000 User Manual

Page 8

Advertising
background image

- 7 -

Installation of Optional Security
Cable

Hint: A pair of needle-nosed pliers will be useful for installing the hitch pin.

“Cut-outs” are provided on both sides of the Drawer Vault to permit attachment of
the Security Cable.

a) First, loop the end of the security cable through the eye and around a

stationary object.

b) Then, insert the threaded mount through the hole in the safe.
c) Hold the mount in place while you slide the star washer over the threaded end

inside the safe.

d)

Spin on the nut and tighten “finger tight.”

e) Insert the Hitch Pin through the hole in the threaded mount, to ensure that the

nut cannot come off

.

Technical Support

If you have followed the above steps carefully and still have a problem operating your
DrawerVault Biometric, phone GunVault Technical Support. Almost all problems can be
solved within minutes over the telephone.

800-222-1055

Requirements for Return & Repair

If possible, do not return your DrawerVault Biometric safe to your dealer. Instead, call
GunVault Technical Service Department. GunVault product delivered without a
pre-arranged Return Authorization Number may be returned unopened, at owner
expense, and fees may accrue.

Advertising