HCO SG560C User Manual
Page 11
HCO ScoutGuard SG560C
3 Quick Introductions
Page
8
indication LED (red) will blink for about 10s. This time interval is
for you to make the Camera ready for automatic surveillance
operation, e.g., to close the bottom cover and to lock it, to fix the
camera on a tree and to walk away. After entering into the ON
mode, no manual controls are needed and possible. The Camera
will take pictures or videos automatically according to the previous
programmed settings, when human or animals enter into the
monitoring region.
3.4 Enter into the SETUP Mode
There are 3 states in SETUP Mode: preview state (preview the
scene in the front of the camera), setting state (make customer
settings), and playback state (view Photos or videos via 2.0” TFT
display).
3.4.1 Preview
After switching the camera to SETUP Mode, it enters into the
preview state.
Press
to exchange between playback mode and preview
mode;
3.4.2 Customer Settings
Press MENU to manually customizing the camera settings
which displayed on the screen or external TV monitor. The
detailed operations will be described in “Advanced Operations”
chapter.
3.4.3 Manual Capturing