HCO SG560C - Manual (Page 19)

HCO ScoutGuard SG560C
4 Advanced Operations
Page 16
it means the PIR will be disabled for 1 hour after each triggering.
The default value is 1 minute. Press “◄” and “►” to decreases or
increases the value.
The following shows how to set triggering interval time to 5
Minutes provided that the previous value is 1 Minute.
e) Press MENU to display the setting menu.
f) Press “▲” or “▼” to select PIR Interval.
g) Press “►” to decrease or increase to 5 Minutes.
h) Press OK to save the current setting and the option will be
un-highlighted.
Press MENU to cancel setting and return to info display.
4.1.9 Format SD-Card
The system will delete all images or videos stored in the
SD-card after formatting, make sure that you have made a backup
of important data.
a) Press MENU to display the setting menu.
b) Press “▲” or “▼” to select Format.
c) Press OK to choose Enter to enter into submenu.
d) Press “►” to select Yes. Yes will be highlighted.
e) Press OK to start formatting the SD-card. During formatting,
the display screen will show a message “Formatting…” as
below.
Press MENU to return to info display.