Human Touch HT-100 Massage Chair - Manual (Page 4)

humantouch.com
6 7
ENGLISH
Unpack the box
1. Unfold the chair
Remove all packaging materials from the
chair. Pull up on the backrest to unfold the
chair to an upright position. The backrest
locks into place automatically.
2. Attach the backrest pad
Attach the top backrest pad flap to the top of the
backrest. Smooth the two bottom flaps under the bottom
of the backrest. Attach each side flap to the side of the
backrest. All flaps attach using hook-and-loop fasteners.
4. Attach the head pillow
Flip the flap on the back of the backrest pad up and
over the top of the chair. Attach the head pillow to the
flap using the hook-and-loop fasteners. Adjust the head
pillow height for maximum comfort.
3. Attach the seat pad
Stand at the right-hand side of the chair. Pull up on the footrest control lever to extend the footrest to a
horizontal position. Pull up on the rotation release handle, located on the right-hand side of the footrest,
then rotate the footrest away from the chair until it is in a vertical position. Attach the seat pad to the seat,
using the hook and loop fasteners. Wrap the flap on the front of the seat pad around the chair frame and
attach it to the top of the chair frame using the hook and loop fasteners.
get ready
Chair Seat Pad Backrest Pad Head Pillow
Your Human Touch massage chair requires some
simple assembly (no tools required). Just attach
the backrest pad, the seat pad and the head
pillow, and you’re done!