Human Touch HT-100 Massage Chair - Manual (Page 5)

humantouch.com
8 9
ENGLISH
3. Adjust the backrest
Use the remote control Recline and
Incline settings to adjust the backrest
angle for maximum comfort.
When changing backrest or foot and calf massager direction, there is a slight pause while the chair gears
shift. This is perfectly normal.
2. Adjust the footrest height
While sitting in the chair, pull up on the footrest
control lever (located on the right-hand side of the
chair) to allow the footrest to rise to a comfortable
height. Release the lever.
take a seat
1. Deploy the foot and calf massager
FOR A FOOT OR CALF MASSAGE
Using your Human Touch massage chair is easy. Just take
a seat and adjust the backrest and foot and calf massager
to the desired position. Your Human Touch
massage chair
helps you feel better from head to toe, using a wide variety
of massage techniques that you control. It’s the perfect
way to relax and refresh.
2. Insert your feet or calves
Pull up on the footrest rotation release handle (located on the right-
hand side of the footrest).
For a calf massage, rotate the footrest away from the chair until it
clicks into position with the foot and calf massager facing up.
Do not
force the rotation of the footrest past the point at which it clicks to
lock. Excess force may damage the mechanism.
For a foot massage, rotate the footrest away from the chair just until
the foot and calf massager is facing up. Do not rotate it so far that
it clicks into position; the footrest should be moving freely for a foot
massage.
To collapse the chair for moving, press down on the backrest release lever, located on the back of the
chair under the rear right-hand corner of the seat, then push the backrest down onto the chair seat.
1. Power on
Plug the power cord into a grounded power
source. Turn the master power switch (on the
bottom center of the backrest) to On.
For an easier exit, retract the footrest and restore the backrest to a full upright position
before getting out of the chair.
Use the footrest lever to retract the footrest. Use the Power Incline button to return the backrest to a
full upright position.
Make sure the area behind/underneath the footrest is clear of any obstructions before retracting the footrest.
Do not stand or sit on the foot and calf massager.