Human Touch HT-135 Massage Chair - Manual (Page 4)

humantouch.com
7 8
ENGLISH
Unpack the box
1. Unfold the chair
Remove all packaging materials from the
chair. Pull up on the backrest to unfold the
chair to an upright position. The backrest
locks into place automatically.
2. Attach the backrest pad
Attach the top backrest pad flap to the top of the
backrest. Smooth the two bottom flaps under the bottom
of the backrest. Attach each side flap to the side of the
backrest. All flaps attach using hook and loop fasteners.
5. Attach the head pillow
Flip the flap on the back of the headrest up and over
the top of the chair. Attach the head pillow to the flap
using the hook and loop fasteners. Adjust the head pillow
height for maximum comfort.
4. Attach the seat pad
Use the remote control legs up setting to raise the footrest to a horizontal
position. Attach the seat pad to the back of the seat, using the hook and loop
fasteners. Wrap the flap on the front of the seat pad around the chair frame
and attach it to the top of the chair frame using the hook and loop fasteners.
3. Power on
Plug the power cord into a grounded 120-volt power source.
Turn the master power switch (on the bottom center of the
chair back) to On.
get ready
Chair Seat Pad Backrest Pad Head Pillow
Your Human Touch massage chair requires some
simple assembly (no tools required). Just attach
the backrest pad, the seat pad and the head
pillow, and you’re done!