Human Touch HT-135 Massage Chair - Manual (Page 7)

humantouch.com
13 14
ENGLISH
Replacement massage-softening pads are available from Human Touch, for an additional charge.
3. Open the horizontal zipper on the back of the backrest pad.
4. Insert or remove the massage-softening pad as desired.
5. Close the zipper.
6. Attach the top of the backrest pad to the chair using the hook and loop fasteners.
7. Flip the head pillow over to the front of the chair.
1. Flip the head pillow over to the back of the chair.
2. Detach the top of the backrest pad hook and loop strip from the chair.
To experience the full power
of Human Touch
just remove
the massage-softening pad
from your chair. But keep it
handy, in case you want to
replace it in the future.
The massage-softening pad softens the massage intensity.
For a stronger massage, remove the massage-softening pad.
customize massage intensity
To keep your product working and looking its best, please follow
these simple care guidelines.
care and maintenance
Cleaning:
1. Be sure to disconnect the power cord from the electrical outlet before cleaning.
2. Do not use benzene, thinner or any other solvents on your massage chair.
3. Remove dust on the backrest or armrest with a vacuum.
4. If the backrest or armrests become soiled, wipe with a damp cloth, then a dry cloth.
5. Common upholstery cleaners may be used for tough stains.
6. When cleaning the controller or around the power switch, use a dry cloth only. Never use a damp cloth to clean
the controller or power switch.
Fabric Care:
To maintain your Human Touch product in optimum condition, dust it frequently and/or vacuum it with a soft brush vacuum
extension. Faux Suede products can also be brushed with a suede brush. Wipe with a slightly damp cloth as necessary. For
tougher stains on non-leather products, use a mild detergent mixed with water. Leather products should be wiped down
occasionally with a leather furniture cleaning solution.
WARNING:
Be sure to test any cleaning solution on a small, inconspicuous part of the product to ensure that the color does not fade prior
to using the solution on the entire product surface.
WARNING: This product is equipped with a thermal resetting protection device. This is an added safety feature
to protect you and this product from overheating. If the product should suddenly stop and will not start, turn the
main power switch, located on the back of the product, to off and do not operate the product for at least 30 minutes.
Failure to turn the product off may result in the product starting unexpectedly when the product cools.
Maintenance and Repair:
1. The mechanics of this product are specially designed and constructed to be maintenance free. No periodic lubrication
or servicing is required.
2. Your chair should only be serviced by an authorized service center.
Storage:
1. When not in use for a long period of time, we recommend that the chair be covered, the power cord be coiled and
that the unit be placed in an environment free of dust and moisture.
2. Do not store near heat or open flame. Do not leave this product exposed to direct sunlight for long periods of time.
This may cause fading or damage.
Miscellaneous:
1. Foreign objects should not be inserted between the massage nodes or the unit housing.
2. Care should be taken not to overload the unit.