Human Touch HT-136 Massage Chair - Manual (Page 4)

humantouch.com
7 8
ENGLISH
1. Unfold the chair
Remove all packaging materials from the
chair. Pull up on the backrest to unfold the
chair to an upright position. The backrest
locks into place automatically.
2. Install the backrest pad
Remove the fabric strip from the hook and loop fastener
on the backrest pad. Attach the backrest pad to the
backrest using the hook and loop fasteners on all three
sides of the backrest and backrest pad.
Smooth the two flaps on the bottom of the backrest pad
under the bottom of the backrest. The flaps attach to the
backrest using the hook and loop fasteners.
5. Install the head pillow
Flip the flap on the back of the headrest up and over
the top of the chair. Attach the head pillow to the flap
using the hook and loop fasteners. Adjust the head
pillow height for maximum comfort.
4. Install the seat pad
Use the remote control legs up setting to raise the footrest to a horizontal position. Attach the
seat pad to the back of the seat, using the hook and loop fasteners. Wrap the flap on the front
of the seat pad around the chair frame and attach it to the top of the chair frame using the
hook and loop fasteners.
Unpack the box
get ready
Chair Seat Pad Backrest Pad Head Pillow
3. Power on
Plug the power cord into a grounded power source.
Turn the master power switch (on the bottom center
of the chair back) to On.
Your Human Touch massage chair requires some
simple assembly (no tools required). Just install
the backrest pad, the seat pad and the head
pillow, and you’re done!