Binatone SPEAKEASY 5 - Manual (Page 11)

Telephone operation continue...
11
During a phone conversation through the
Handset, press the SPEAKERPHONE button
to speak hands-free. Replace the Handset on
the Base unit cradle.
While in speakerphone mode, lift the Handset
to enable a private conversation.
During a call, the phone mutes the microphone
or the mouthpiece so that the person on the
other end cannot hear you.
1 Press MUTE button once.
Ö While the microphone is muted, MUTE MUTE MUTE MUTE MUTE will
be shown on the lower left corner of the display.
2 Press MUTE button again to get back to the
call.
Inserting a For some switchboard systems, an access
Pause in the number must be dialed (usually an 8 or 9) to
dialing get another dial tone and an outside line.
sequence Pressing REDIAL/PAUSE button immediately
after the access number, a pause of about 3.6
seconds will be entered, and the desired
number can be dialed immediately.
Press REDIAL/PAUSE button to insert a
pause when dialing or storing Long Distance
Access Codes.
To switch
between the
Handset and the
Speakerphone
Replace the Handset on the Base unit cradle,
or press SPEAKERPHONE button on the Base
unit.
Ö The SPEAKERPHONE light indicator will
turn OFF.
To end a call
To mute the
mouthpiece or
microphone
During a call:
Adjust the volume of the speakerphone to your
comfortable volume level using the
SPEAKERPHONE volume switch located on
the right side of the Base unit.
To adjust the
speakerphone
volume