Human Touch PC-410 Perfect Chair - Manual (Page 3)

3
humantouch.com
2
get ready
Your Human Touch Perfect Chair requires some simple
assembly. Just attach the headrest/footrest frames, pads,
arm caps, and head pillow, and you’re done!
3
INSTALLING THE FOOTREST FRAME
Slide the body pad onto the lower part of the chair frame,
making sure that the frame slides into the fabric pocket located
on the bottom side of the pad.
Smooth the body pad into place, from the footrest toward the
backrest. The pad is automatically secured using the hook and
loop fasteners.
ATTACH THE BODY PAD
1. Slide the body pad onto the chair frame.
2. Secure the body pad.
UNPACK THE BOXES
Body pad
Head pad
Phillips-head
screwdriver
Chair frame Headrest frame
Head sock
Slide the two ends of the footrest frame into the holes in the
front of the chair frame.
2. Slide the footrest frame onto the chair frame.
Using a Phillips-head screwdriver and the two provided screws,
secure each side of the footrest frame to the chair frame.
3. Replace the footrest frame screws.
Using both hands, continue to pull the seat canvas all the way
forward to cover the footrest frame, then secure the two front
and two side flaps, using the hook and loop fasteners.
5. Finish securing the canvas to the frame.
Using the Phillips-head screwdriver (provided), remove the two
screws from the footrest frame. Retain them for use in step 3.
1. Remove the footrest frame screws.
Footrest frame
Using both hands, gently pull the seat canvas forward just to
the top of the footrest frame, then secure the two flaps located
underneath the canvas to the footrest frame.
4. Attach the canvas to the footrest frame.
Lumbar pillow
Head pillow
Some pad sets include a separate
lumbar pillow instead of the upgraded
body pad with built-in lumbar support.
Arm cap (2)
Screw (6)