JK Audio BlueDriver-M3 - Manual (Page 11)

Bluetooth Wireless Technology
7
Bluetooth Wireless Technology
least 20 seconds. After resetting, the
BlueDriver will return to Pairing Mode.
Reconnecting to Paired
Devices
To reconnect to a device that is in
Connection History, the BlueDriver
should be in Idle Mode (see page 4)
and will automatically connect to a
paired device that is within range.
When reconnecting to your cell
phone, the BlueDriver should be set
to <Phone>. For Bluetooth headsets,
the BlueDriver should be set to
<Headset>.
Disconnecting from a Device
To disconnect from any Bluetooth
wireless technology enabled device
and turn the power off, simply hold the
<Connect Button> until the blue LED
turns off (approx. 5 seconds).
Connection History
BlueDriver retains a history of the
16 most recent devices. To clear
connection history and return to
factory default, with the BlueDriver
powered off, set the switch to the
<Headset> or <Phone> position, then
hold the <Connect Button> in for at
When Should I Release the MFB Button?
Idle Mode Pairing Mode Role Change Clear
Bluetooth LED
seconds