JK Audio BlueDriver-M3 - Manual (Page 14)

BlueDriver-M3 Wireless Audio Interface
Power Send
Headset
Connect
Phone
BlueDriver-F3™
JK Audio™
10
Wireless Applications
Bluetooth Headset as a
Talkback Intercom
Need a short range point-to-point
intercom during your next live
event? Simply plug BlueDriver-M3
into any mic level input of your
mixer or console. Pair to your
favorite Bluetooth Headset (View
our Facebook page for a Discussion
on our headset recommendation).
This setup allows voice-band bi-
directional audio up to 30 feet from
the BlueDriver.
The mini cable provided with your
BlueDriver allows you to connect
an aux output of your mixer to the
<Send> jack on the BlueDriver-M3.
This signal goes back to the headset,
so make sure you don’t send your
voice back to yourself. See page 13
for a “Mix-Minus” setup.
3.