Getting to know your remotemix 3.5 – JK Audio RemoteMix 3.5 User Manual
Page 6
2
Getting to Know Your RemoteMix 3.5
6
7
11
10
8
9
2
3
4
1
5
1.
Mic Level Controls
Each of the three XLR inputs has a level control knob with a separate red
<Peak> LED to indicate clipping on each channel. If you see more than an
occasional flash of the <Peak> LED you should decrease the level for that
channel.
2.
Master Level Control
The <Master> control knob will set the overall level of the sum of all the mic
and line inputs. The LED meter for the master audio level ranges from -30
dB to +3 dB.
3.
Keypad
The telephone keypad provides DTMF tone dialing. You may use the
keypad at anytime during a call but keep in mind that both transmit and
receive telephone audio are muted during a keypress.
4.
Redial
Press this button to instantly redial the last telephone number that was
keyed in.
5.
Headphone Controls
Each of the three headphone outputs has a separate level control so each
listener can adjust their audio level independently.
Controls & Indicators
RemoteMix 3.5™
Broadcast Field Mixer