JK Audio RemoteMix C+ - Manual (Page 2)

2
RemoteMix C+ is a professional audio mixer and headphone
amplifier designed to interface with any standard analog
telephone line. This telephone hybrid operates on batteries
or AC power.
Simply plug your audio equipment into RemoteMix C+ and
connect to a phone line. You can now put on headphones,
plug in a microphone, and you are ready to broadcast the
game or talk up a taped interview. The RCA type jacks on
RemoteMix C+ are equivalent to the jacks found on most
home tape recorders, CD players, and receiver/amplifiers.
There are two balanced XLR microphone inputs and the first
one can be switched for mic or line level input. The balanced
line level XLR output jack provides a high quality connection
to mixers and professional tape gear. The adjustable hybrid
circuit provides control over the mix of transmit and receive
audio at the output jacks.
Cellular Telephones
Use our Daptor One to connect the standard 3-conductor,
2.5 mm micro-jack on your digital wireless telephone to the
RJ-11 phone jack on the RemoteMix C+. Then you will con-
tinue to use your wireless phone to dial or answer the call,
but you will use the microphone and headphones plugged
into your RemoteMix C+ during the call.
RemoteMix C+ was also designed to work well with a data
interface (fax / modem adapter) connected to your older ana-
log cellular telephone or bag phone. These are available
through your cellular dealer. These adapters turn your
cellular telephone into an RJ-11 equivalent jack which
replaces the wall jack in this picture.
Introduction