JK Audio RemoteMix C+ - Manual (Page 5)

5
Ringer
RemoteMix C+ has an audible internal ringer for incoming
calls. This can be turned off using the switch on the side of
the unit.
Phone Line
Connect this RJ-11 jack to the wall jack of a standard, single-
line analog telephone line.
Keypad
The telephone keypad is
for tone or pulse dialing.
You may use the keypad
at any time during a call
but keep in mind that both
transmit and receive
audio are muted during a
keypress.
Phone Line Switch
This switch acts as the
switch-hook for the
telephone line. The Hang
Up position is the normal
on-hook position when
you are not using the line
or you are waiting for a call. When you want to place a call,
or when a call comes in, switch to the Dial/Talk position.
Tone / Pulse Dialing
RemoteMix C+ is equipped with a switch to select tone
(DTMF) dialing or pulse dialing. The switch is located
underneath the battery door. With the switch towards the
volume control knobs, the unit is in the “pulse” mode. When
in “pulse” mode the “*” key will set the unit to transmit digits
as tones regardless of the switch position. To return to pulse
dialing turn the power off and back on.
Operation