Kino Flo BarFly 450 DMX - Manual (Page 10)

Manual Operation
Lamp Switches
The BarFly 450 has four Lamp Switches which allow for individual lamp
operation. Each switch controls one lamp.
Turning off 2 lamps equals a one f-stop reduction in light output without
color shift.
Manual Dimming Control
The BarFly 450 DMX fixture features a built-in dimmer control. For full
light output, turn dimmer fully clockwise.
Note: The fixture is designed to start lamps at any dim setting. However,
in cold temperatures, make sure the dimmer is set to full before striking.
Once the lamps have come up to full temperature after a few minutes,
then dim to the desired light level.
BarFly 450
Lamp Sequence
10
1 2 3 4