Kino Flo BarFly 450 DMX - Manual (Page 11)

Remote Dimmer
The Remote Dimmer accessory (DIM-5) is designed to remotely dim the
BarFly. A 15ft dimming cable is supplied with the dimmer.
Insert the dimmer cable into the receptacle marked REMOTE DIM.
Inserting the dimmer cable will automatically disable the onboard dimmer.
Dimming and Color Temperature Shift
Dimming can be used to adjust the light output of the fixture. The color
temperature will shift marginally if kept to within one f-stop. Dimming beyond
one f-stop may result in a reduction of color temperature as well as a
noticeable shift to magenta.
Insert the other end of the dimmer cable into the Remote Dimmer (DIM-5).
Note: All manual controls are disabled as soon as the DMX cable is applied.
For Manual control with DMX cables plugged in, set address to “000”.
There is a 5 second delay when switching between DMX and Manual control.
11