Kino Flo Celeb 400 DMX LED - Manual (Page 6)

6
Start Up
Kelvin Selection
When power is first applied to
the fixture, the alphanumeric
display shows the current
software version.
Press the On/Off button
to turn on the fixture.
The display will default to a
Kelvin setting of 5000.
There are 5 Kelvin factory
preset buttons. Left to right
they display 2700K, 3200K,
4000K, 5000K and 5500K.
A green indicator will light to
the left of the active button.
Rotating the adjustment knob
will change the Kelvin.
Press the rotating knob once
to shift the Kelvin profile from
Coarse to Fine increments.
In the Coarse mode,
the fixture can be adjusted in
one rotation of the knob.
In Fine mode, it will require
8 rotations for full range of
adjustment.