Kino Flo Celeb 400 DMX LED - Manual (Page 9)

The Celeb 400 DMX operates
on two DMX channels using
DMX512. The first channel
operates dimming; the 2nd
channel operates Kelvin color
temperature control.
Once an address is selected,
the fixture automatically
assigns 2 channels.
Press and hold the DMX
ADDRESS button to select a
DMX address. The displayed
number will flash while in edit
mode.
Turn the dimming knob to
select a valid address from
1-512. (Note: 0 or 513-999
are invalid addresses.)
Press the rotating knob once
to shift between Fine (single
digits) and Coarse (in 10th’s)
address selection.
DMX Operation
9
To save the DMX channel,
press the DMX ADDRESS
button again. When set,
the displayed number will stop
flashing.