Kino Flo Mega 4Bank DMX (BAL-455M) - Manual (Page 3)

Fixture Assembly
The Mega 4Bank fixture is comprised of two removable Louvers, a Reflector and
a Lamp Harness. The Louvers and Reflector are held in place with Velcro fasteners.
The Lamp Harness is secured by means of a ¼ turn fastener and two clips.
Note: The 8ft fixtures include two 4ft louvers; the 6ft fixtures include two 3ft louvers.
To Release the Lamp Harness
Remove the harness from clips located under the reflector. Rotate the ¼ turn fastener
clockwise to release harness.
The Harness wiring is color-coded. The same color-code must match at each end of
the lamp for proper operation.
The lamps can operate independent of the fixture
allowing them to be built into sets or custom soft boxes
or hand-held as a single tube for an eye-light.
WARNING: Always use safety-coated lamps to avoid
injury if lamp breaks.
Mega 4Bank Harness
Lamp Harness Color Codes
Red
Yellow
Black
Blue
3
(X2)