Kino Flo Mega 4Bank DMX (BAL-455M) - Manual (Page 8)

8
A) Circular Output Connector: Provides electrical power to
the lamp head with the use of a Mega 4Bank extension cable.
B)
DMX-In & DMX-Out: DMX-In receives DMX signals from Dimmer Board.
DMX-Out relays DMX signals through other Fixtures or Instruments.
(
Note: Each Mega 4Bank DMX ballast (BAL-455M Series) has an
“ Auto Terminate” feature. The last ballast that does not have an
XLR cable attached to the “Out” port will automatically terminate.)
C)
Fuse: Provides circuit protection. Note: If Fuse is “blown” or “open”,
replace with same type of fuse rating as marked.
D)
DMX Address: Sets DMX Address.
(Channels 1~4 = Lamps; Channel 5 = HO/Std)
E)
DMX Indicator: Lights if valid DMX signal is present.
F) Manual Switches: Turns lamps on and off manually.
G) HO/STD: Set to HO for High Output and Std for Standard light output.
Mega 4Bank DMX Control Panel
A B C D E F G