Krell S-300i - Manual (Page 13)

Remote Control Only
See Figure 2 on page 6
Krell S-300i 9
The S - 3 0 0 i remote control uses two A A A alkaline batteries, which
are included with the shipment.
To open the battery compartment on the back of the remote
c o n t r o l :
1 . Place the remote face down on the table.
2 . Use T-8 Torx wrench to remove the bottom cover.
Do not use a knife or other sharp objects to open the battery compart -
ment; they will scratch the remote control finish.
3 . Insert two A A A batteries with their flat (-) Ends touching the
springs in the battery holder.
4 . Screw bottom cover back onto the remote
The remote control is ready for operation.
Replace batteries when remote control function becomes intermittent.
Remove batteries if the remote control is not used for a long period of
time. Battery leakage can damage the remote control.
The S - 3 0 0 i remote control accesses complete power amplifier and
preamplifier functions. A description of the functions unique to the
S - 3 0 0 i f o l l o w :
N o t e
N o t e s
B a t t e ry
I n s t a l l a t i o n
and
R e m o v a l
Remote Control
Only Functions