Bosch AUTOMATIC COFFEE CENTRE TCA 6301 UC - Manual (Page 15)

15
q Push down the sleeve a on nozzle.
q Place an appropriate cup under the nozzle.
q Rotate function selector to 0 and fill the cup.
d WARNING d
Risk of scalding!
When the function selector is set
to
0, the nozzle may spurt slightly.
Escaping water is very hot. Do not
touch nozzle or direct at people!
q End the process by rotating the function selector
backĂto z .
q Push up the sleeve a on nozzle
q Immerse nozzle deep into the liquid which
isĂtoĂbeĂheated.
q Slowly rotate function selector to =.
The appliance now heats up for approx. seconds.
ThenĂthe liquid is heated.
d WARNING d
Risk of scalding!
When the function selector is set
to
=, the nozzle may spurt slightly.
Escaping steam is very hot. Do not
touch nozzle or direct at people!
q End the process by rotating the function selector
backĂto z .
Note: When nozzle has cooled down, clean
immediately.
Dried residue is difficult to remove.
Preparing hot water
Steam for heating
drinks