Bosch AUTOMATIC COFFEE CENTRE TCA 6301 UC - Manual (Page 22)

22
DeĆactivating the setting:
q Set the time to --:-- with < or> .
Note: The current time must be set for this function to
run.
i The switchĆon time is retained even if there is a
power failure or the power switch 1 is actuated.
This function is used to specify after how many hours
following the last brew the appliance automatically
switches to standby mode.
q Hold down button
%
on display for at least
3 seconds.
q Select OFF IN with < or>.
q Press button
% , hours display flashes.
q Change the setting with < or >.
q Press button
% to save the setting.
q Press the & button. Back to standby.
i The switchĆoff time is retained even if there is a
power failure or the power switch 1 is actuated.
The number of brewed espressos, coffees and
preground coffees is displayed here. The number of
brews are counted automatically.
q Hold down button
%
on display for at least
3 seconds.
q Select NO.BREWS with< or>.
q Press the & button. Back to standby.
i This number cannot be changed!
Possible from standby" mode only
q Simultaneously hold down < and > for at
least 3 seconds ć all saved settings are deleted.
i The display indicates the messages in the german
language after the RESET function.
Standby mode
OFF IN
4 HOURS
OFF IN
2 HOURS
Displaying number
ofĂbrews
NO.BREWS
- - - 86
RESET function