Nipros HDF-700 - Manual (Page 23)

Connection
23
HD View Finder HDF-700
HD/SDコンポーネントアナログ信号の接続 HD/SD Analog Component Video Signal Connection
1 Connect the HD/SD analog component video output signal from a camera to the ANALOG Y/ P B / P R
connectors with BNC cables.
ANALOG Y/PB/PR 入力コネクタへカメラのHDコンポーネント 出力コネクタから接続します。
from Camera
HD/SD analog component
video signal output
Y
P
B
P R
ANALOG
BNC
HD/SD analog
component
video signals
8-Color Bar Caribration (COMPONENT CALIBRATE Operation) 画面の色の較正
When the camera is changed, calibrate the color of the HDF-700.
(1)Input the 8-color bar signal (analog component) to the ANALOG Y/Pb/Pr component connectors.
(2)Set the INPUT select switch to the COMPONENT position according to the input signal.
(3)Operate the caslibration as follows.
Access to the menu/ SETUP/COMPONENT CALIBRATE by the ENTER knob.
By rotating the ENTER knob access to 8 COLOR CAL NOW and press the knob.
By rotating the konb again access to CONFIRM and press the knob.
COMPONENT CALIBRATE ＞
8COLOR CAL NOW
CANCEL
CONFIRM
CANCEL
rotate
press
rotate
rotate
press
press
Calibration
ENTER
カメラを替えたとき、カメラの色相差があるので、カメラの 8カラーバー信号を入力して較正(キャリブレーション)を
行います。 入力を COMPONENT に切り替えて、メニューのCOMPONENT CALIBRATE で行います。