Nipros HDF-700 - Manual (Page 34)

34
ユーザー設定
User Function Setting
Menu of the WAVEFORM for the UTILITY settings
VECTORSCOPE ［ON］
WAVEFORM/HSG ［ON］
RETURN
WAVEFORM ［ON］
SIZE ［MEDIUM］
POSITION ［RIGHT BOT］
DISP TYPE ［OVERLAY］
Y OVER LIMIT ［95.0%］
Y UNDER LIMIT ［0.0%］
HISTOGRAM ［OFF］
RETURN
VECTORSCOPE ［ON］
SIZE MEDIUM］
POSITION ［LEFT BOT］
DISP TYPE ［OVERLAY］
GAIN ［ 1.00］
ベクトルスコープの設定
1.00
ON
OFF
SMALL
MEDIUM
LARGE
LEFT TOP
LEFT BOT
RIGHT TOP
RIGHT BOT
OVERLAY
95.0
0.0
ON
SMALL
MEDIUM
LARGE
LEFT TOP
LEFT BOT
RIGHT TOP
RIGHT BOT
OVERLAY
Menu of the VECTORSCOPE for the UTILITY settings
6-3-2
6-3-3
-7.3 to 109.1
ON or OFF
or OVERLAP
ON or OFF
ON or OFF
1.00 to 4.98
or OVERLAP
ウェーブフォーム/
ヒストグラムの設定
WAVEFORM VECTORSCOPE
MADIUM
SMALL
LARGE
RIGHT BOT
LEFT TOP
LEFT BOT
RIGHT TOP
SIZE POSITION
RETURN
MAIN
RETURN
MAIN
Select the WAVEFORM display, ON or OFF.
Select the HISTOGRAM display, ON or OFF.
Select the WAVEFORM display SIZE, SMALL, MADIUM or LARGE.
Select the WAVEFORM display POSITION, LEFT TOP, LEFT BOTTOM, RIGHT TOP or RIGHT BOTTOM.
Select the DISPLAY TYPE, OVERLAP or OVERLAY.
Select and set the upper limit and lower limit level to indicate the OVER LIMIT and UNDER LIMIT of the Y signal by
changing the graph color to RED.
Select the VECTORSCOPE display, ON or OFF.
Select the VECTORSCOPE display SIZE, SMALL, MADIUM or LARGE.
Select the VECTORSCOPE display POSITION, LEFT TOP, LEFT BOTTOM, RIGHT TOP or RIGHT BOTTOM.
Select the DISPLAY TYPE, OVERLAP or OVERLAY.
Select and set the GAIN to indicate the VECTORSCOPE, 1.00 to 4.98
Adjustments and Settings HD View Finder HDF-700