Nipros HDM-70WV - Manual (Page 33)

33
Adjustments and Settings
ユーザー設定
User Function Setting
Menu of the WAVEFORM for the UTILITY settings
VECTORSCOPE ［ON］
WAVEFORM ［ON］
RETURN
WAVEFORM ［ON］
DISP TYPE ［OVERLAY］
Y OVER LIMIT ［95.0%］
Y UNDER LIMIT ［0.0%］
RETURN
VECTORSCOPE ［ON］
DISP TYPE ［OVERLAY］
GAIN ［ 1.00］
ウェーブフォームの設定
ベクトルスコープ
1.00 to 4.98
ON or OFF
OVERLAY or OVERLAP
-7.3 to 109.1
Menu of the VECTORSCOPE for the UTILITY settings
ON
OVERLAY
95.0%
0.0%
ON or OFF
OVERLAY or OVERLAP
ON
OVERLAY
1.00
6-3-2
6-3-3
HD Monitor HDM-70WV
-7.3 to 109.1
［default setting］
デフォルト設定値
ベクトルスコープの設定
［default setting］
デフォルト設定値
Select the WAVEFORM display, ON or OFF.
Select the DISPLAY TYPE, OVERLAP or OVERLAY.
Select and set the upper limit and lower limit level to indicate the OVER LIMIT and UNDER LIMIT of the Y signal by
changing the graph color to RED.
Select the VECTORSCOPE display, ON or OFF.
Select the DISPLAY TYPE, OVERLAP or OVERLAY.
Select and set the GAIN to indicate the VECTORSCOPE, 1.00 to 4.98