Powers 595 Series 11 Self-Operating Temperature Regulators - Type ST Stainless Trim - Manual (Page 8)

8
Valve Seat Ring Tool
■
T
13/32 DIA. BRASS ROD
CUTTING 1/2 VALVE TOOL
1. TURN DOWN TO 13/16(48) DIAMETER
2. DRILL 13/32(10) DIAMETER HOLE 1/2(13) DEEP
3. FILE GROOVE 3/16(4.8) WIDE BY 3/16(4.8) DEEP
A
B
3/16 (4.8) DEEP
(13)
(3.2)
(76)
FILE 3/16(4.8) GROOVE
15/32(12)
TOOL ASSEMBLY - 1/2" NPT and 3/4" & 1" NPT
1. INSERT CUTTING BIT INTO BODY GROOVE (1/2) or SQUARE HOLE (3/4 & 1).
2. PLACE GUIDE INTO POSITION OVER TOOL BIT AND PRESS INTO BODY.
S
L
3/16 (4.8)
SQUARE
A
(25)
B
3/16 (4.8)
SQUARE
USE 3/16(4.8)
DRILLTHEN
FILE SQUARE
M
1(25)
3
1/8
1/2
1
2
3
1
TOOL TURNING
ROD
BIT
BONNET
GUIDE
SEAT
RING
VALVE
BODY
1/2" NPT Tool 3/4" & 1" NPT Tool
Turning Rod
Cutting Bit
3/4" & 1" Bonnet Guide 1/2" Bonnet Guide
5
(127)
TOOL ASSEMBLY-1/2" NPT AND 3/4" + 1" NPT
1. INSERT CUTTING BIT INTO BODY GROOVE (1/2) or SQUARE HOLE (3/4 & 1).
2. PLACE GUIDE INTO POSITION OVER TOL BIT AND PRESS INTO BODY.
1/2" NPT Tool
Turning Rod
3/4" & 1" NPT Tool
3/4" & 1" Bonnet Guide
1/2" Bonnet Guide
Cutting Bit
1. TURN DOWN 13/16(48) DIAMETER
2. DRILL 13/32(10) DIAMETER HOLE 1/2(13) DEEP
3. FILE GROOVE 3/16(4.8) WIDE BY 3/16(4.8) DEEP
CUTTING 1/2 VALVE TOOL