Powers ES200/400 Emergency Tempering Valves - Manual (Page 2)

TI ES200/ES400 v2 Page 2
TAG DESCRIPTION
1 Etched Bonnet
2 Adjustment Screw
3 Bonnet Screw
4 Set Screw
5 Bonnet Gasket
6 Motor Housing
7 Housing Bolt
8 Temp Limit Spacer
9 Spacer Set Screw
10 Overload Assy
11 Overload “O” Ring
12 Funnel
13 Thermal Actuator
14 Funnel “O” Ring
TAG DESCRIPTION
15 Motor Adapter
16 Motor Adapter “O” Ring
17 Hot Water Poppet
18 Pressure Relief Spring
19 Pressure Relief Poppet
20 CW Bypass Plug
21 Bypass Spring
22 Cold Water Poppet
23 Return Spring
24 Body “O” Ring
25 Body
26 Body Cap “O” Ring
27 Body Cap
ES200 KIT NUMBER ES400 KIT NUMBER DESCRIPTION CONTAINS ITEMS:
390-573 390-574 Actuator Replacement Kit 5,13,15,16,24
390-575 390-576 Poppet Replacement Kit 15-24,26
390-577 390-578 Gasket and “O” Ring Kit 5,11,14,16,24,26
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
2
1
6
3
4
8
7
5
PARTS LIST
REPAIR KITS
RECIRCULATION
The mixing valve should be mounted as close as possible to
the fixture(s) that it serves.
If the valve is some distance from the hot water source, recir-
culation may be required to keep the hot water supply within
specified limits.
CAUTION: Use care in installing the cold water line such
that it does not pass through areas with high ambient
temperatures or become exposed to direct sunlight.
Powers ES Series
Tempering Valve
Hot Water Recirculation
Tempered Water
to Fixtures
Cold Water
Hot Water Return
Hot Water
H C