Revel C50 - Manual (Page 6)

Figure 3. A REVEL
PERFORMA C50 loudspeaker
with its inner packing materials.
UNPACKING
To avoid injury, please use care during unpacking. Always
stand as straight as possible and use your leg muscles to lift the
REVEL PERFORMA C50 loudspeaker. Do not lift it while
bending from the waist.
To unpack the REVEL PERFORMA C50 loudspeaker, perform
the following steps:
1. Place the REVEL PERFORMA C50 loudspeaker onto its side.
2. Open the bottom flaps. Stand the carton in the up position.
3. Lift the carton off the loudspeaker and set it aside, being careful
not to damage the contents (see Figure 3).
4. If desired, remove the spike foot kit and flat foot. Set them
aside for later installation (see Installing Stands on page 8 or
Installing Spikes on page 10). Otherwise, keep the spike kit and
flat foot in their respective cavities for future use.
5. Remove the left and right pads and the protective bag. Use
caution to avoid scraping the finish.
6. If desired, open the filler and install the enclosed grille by
pressing the frame into provided openings. Otherwise, keep the
filler (and grille) intact and store it for future use.
REVEL PERFORMA C50
Owner’s Manual
6
Warranty Card and
Owner’s Manual
Spike Foot Kit
(in cavity of
Left Pad)
Left Pad
Right Pad
Protective
Bag
Flat Foot
(in cavity of Right Pad)
Filler and
(enclosed) Grille
WARNING