Richter KNRP-D/F Series Control Ball Valves - Manual (Page 17)

Series Series KNR/F, KNRP/F, KNR-D/F, KNRP-D/F
Page 17
9520-053-en Revision 04
TM 7333 Edition 10/2008
10.7 Dimensional drawing with actuator
DN H1 H2
Connect.
dimen. acc.
to ISO 5211
H3 H4 L L1 L2 L3
15 130
20 150
25
50 60 F05
160
40 77 200
50 80
60** F07
230
80 118 310
100 134
80 F10
350
150 480
200/150 *
184 80 F12
457
* DN 200 with reduced bore DN 150
** H2 = 80mm if F10 or F12 on the actuator side
Dimensions H3, H4, L1, L2 and L3 vary depending on the actuator manufacturer.
All dimensions in mm.
Flange connecting dimensions:
DIN EN 1092-2, type B (ISO 7005-2, type B) PN 16 or flanges drilled to ASME B16.5 Class 150.