Richter KNP-D/F Series Ball Valves (ISO/DIN) - Manual (Page 19)

Series KN/F, KNP/F, KN-D/F, KNP-D/F
Page 19
520-050-en Revision 10
TM 8361 Edition 10/2011
10.8 Dimensional drawing ball valve with lever
DN 15 20 25 40 50 80 100 150 200 1)
L 130 150 160 200 230 310 350 480 457
L4 59 59 70 88 107 140 175 240 223,5
H 130 130 130 155 155 180 195 265 265
HL 179 179 179 259 259 410 410 513 513
1) DN 200 with reduced bore DN 150
All dimensions in mm.
DN 150, DN 200: At Xp > approx. 2 bar a worm gear is recommended instead of hand lever.
Flange connecting dimensions:
DIN EN 1092-2, type B (ISO 7005-2, type B) PN 16 or flanges drilled to ASME B16.5 Class 150.